Dual 8-inch Three-Way Four-Unit Large Steamed Bun Midrange HiFi Loudspeakers 4Ohm/300W Floor Speaker

The inverted design using a single bass unit fully expands low-frequency diving and is easier to push.

In terms of sound performance, the high-frequency ends extend well, the detachment feeling is strong, the mid

frequency details are rich, the density is excellent, the explosive power is good, and the low-frequency sound is

relaxed and elastic, diving deep! Overall, sound is noble, it doesn't require too many fancy words to embellish,

one ear is a surprise, one sound is unforgettable!

Technical Specifications

Product Model: Shock Pad · Shang-P81

Speaker type: three-way inverted floor box

High frequency unit: Double folded one inch silk film high frequency (titanium voice coil skeleton)

Mid tone unit: Six inch woven ball top diaphragm mid

Bass Unit: Eight inch composite paper coated diaphragm bass (Y35 aviation grade magnet)

Sensitivity: 86dB

Peak power: 150W

Impedance: 6 Ω

Frequency response range: 45-35000Hz

Frequency division point: 370, 2.6K

Suggested driver: 100W-300W

Net weight: approximately 37kg per unit

Gross weight: approximately 41.3kg/unit

Size: Height 1002 x Width 373 x Depth 409mm per unit (including face mask and terminal post)

Outer packaging dimensions: length 112 x width 51 x depth 39cm/unit

(Manual measurements have errors)

Three line split connection

The first type: conventional connection method

The wiring backplane provides a three wire split CMC high pole connection. The back panel consists of tweets, mids, and bass from top to bottom. We conducted a lot of data analysis during development, and in our electroacoustic testing project, we were unable to distinguish the obvious data differences between the three groups of speaker connections based on the test data. However, during subjective listening testing, the actual subjective listening experience of speaker connections in each group is different. Therefore, we recommend that users connect to the mid group or try multiple connection methods based on their own listening experience!

The second type:

Double line split connection method

When using a dual line split connection, the jumper wire connecting the mid to bass terminal of the original box should be removed, and two sets of speaker wires can be connected separately to push the unit. For example, one set of mid tweeter terminals and one set of bass terminals, pay attention to connecting the positive and negative poles to the speaker.

The third type:

Three wire split connection method

When using a three wire splitter connection, all jumper wires in the original box should be removed. Three groups of speaker wires can be connected separately, such as a Twitter terminal group, a Mid terminal group, and a Bass terminal group, to push them. Pay attention to connecting the negative terminal to the speaker