PAP-HTMS-1 Wada Maoshi HiFi Audiophile Tube Preamplifier 12AX7 1
PAP-HTMS-1 Wada Maoshi HiFi Audiophile Tube Preamplifier 12AX7 Original price was: $331.89.Current price is: $269.90.
Back to products
OPA-2A 2A3 Tube Power Amp Original Bladder Machine Audiophile Lug Amplifier 1
OPA-2A 2A3 Tube Power Amp Original Bladder Machine Audiophile Lug Amplifier Original price was: $2,126.74.Current price is: $1,699.90.

MS-110B KT88 Tube Integrated Amplifier Push-Pull Headphone Amplifier Class A 50WX2 110V/220V

Price range: $1,256.90 through $1,310.00

Guaranteed Safe Checkout

Features & Compatibility

Parameters

Output power            50W + 50W (6Ω)

THD                   â‰Ã‚¤1.0% (at 12W)

SNR                   â‰Ã‚Â¥85dB (A weight)

Vacuum tube            KT88-98×4 ,12AU7×2, 12AT7×4

Frequency response      10Hz ~ 50KHz (-2dB)

Input sensitivity          0.3V(1kHz)

Input                  RCA×4

Output Impedance            4Ω  8Ω

Power supply          110V/220V±5% (Set before useing)

Power consumption          350W

Volume(W×D×H)              300mm x 420mm x 200mm

N.W.                  21.5kg

G.WÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 24kg

Vacuum tube amps the use of attention:

1. Disable output short circuit and output load, before you start you must first connect speakers or headphones, the best is always keep them connected,

2. Start with minimal volume,

3. The supply voltage should be stable, with the use of conditional HiFi clean power for better protection and sound,

4. When the vacuum tube amplifier operating temperature is high, pay attention to ventilation, not to touch hot tube,

5. Do not put water on a hot vacuum tubes,

5. Do not put water on a hot vacuum tubes,

6. Boot and shutdown interval of 5 minutes,

7. Do not over 6 hours of continuous work,

8.6 ohm speaker connected to the 4 ohm, 8 ohm interfaces are available,

9. vacuum tube amplifier sound 40% depending on the power amplifier tube quality, 40% depends on the quality of output transformer, 10% depends on other electronic components quality, 10% depending on the manufacturing process,

Additional information

Weight24.000 kg
Dimensions50 × 40 × 30 cm
Brand NameNONE
Control MethodOthers
Materialothers
Surround sound channel configurationOthers
Output Power35W
High-concerned chemicalnone
Maximum Power Per Channel35W
OriginMainland China
Number of channels2(2.0)
PackageYes

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “MS-110B KT88 Tube Integrated Amplifier Push-Pull Headphone Amplifier Class A 50WX2 110V/220V”