SBH-08 S-BACH C1 3-Way 6-Unit HiFi Floor Standing Speaker, 500W/4Ω High Power, 28-Core Tweeter, Home Theater Main Speaker Pair

Product parameters:

Power:500W- 1000W

Woofer: 11 inch German ETON 12-212 sandwich honeycomb cone woofer *2

Midrange: 7 inch German ETON 7-212 sandwich honeycomb cone midrange*2

Tweeter: 1.2 inch ETON 28SD1 silk dome tweeter*2

Frequency Response: 23Hz ~ 26kHz (+3dB)

Nominal impedance: 4Ω

Sensitivity: 91dB (1W/1m)

Overall weight: 232kg/1 pair

Dimensions: 371W * 1985H * 694D (mm)

(CRYSTAL) Three frequency six unit C1 fever level H-END floor speaker, featuring a dumbbell fully symmetrical design and a height of 1985mm/78.2 inches, providing you with a truly immersive experience.

The woofer unit adopts a two inch German (ETON) 11212 Symphony II series sandwich honeycomb basin bass. The sandwich honeycomb basin series is a highly praised HIFI speaker unit by ETON, with good dynamic response and powerful low-frequency response

The midrange unit adopts two 7-inch German ETON7-212 Symphony Series sandwich honeycomb basin units, and the mid range vocal performance is natural and full.

The tweeter unit adopts two 12 inch German ETON28SD1 silk membrane dome tweeters, with a delicate and soft sound, noble and transparent sound, which is not tiring after listening for a long time, making it easy to control various types of audio sources.

Hi end level frequency division system

The frequency division system is the heart of the entire speaker system. The Crystal No. 2 C2 frequency division system is a Hi end level frequency division design. The R&D engineers of C1 refer to the Kama Veyron frequency division circuit architecture and strict requirements. From the combination of dozens of components to repeated experimental calibration, from frequency response curves to true listening sensation, this Hi end level noble artwork has been achieved the most.

The box strictly follows acoustic parameters, with independent separation of the bass unit sound chamber. The thickness of the side panel is 30-50mm, and the thickness of the panel and back panel is 80mm. The shoulder panels on both sides of the box are made of imported ebony solid wood leather, cut and carved by the Australian pine board CNC, and pasted externally. The other parts are painted with high gloss crystal piano paint, making the entire box elegant and noble from the inside out

Luxury and steady.

The oblique cutting process inside the box effectively controls the reflection of sound waves inside the box; The thickness of different parts of the entire box may vary, and this structure will help eliminate box resonance.

The bottom X-shaped tripod is supported by four special steel foot nails, which not only provide shock absorption and stability to the box, but also effectively protect the box from moisture, greatly improving the low-frequency condensation performance index, making the low-frequency more clean and powerful.